What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 19.06.2025 12:10

One is “what exactly is in a ‘surge protector’ ? ”
Edit 2024–10.
One
I gave him everything. He said he loved me. Why?
These devices are installed between the “hot” and “neutral” and protective ground.
The MOV will conduct when the voltage exceeds 50% of line voltage.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
If you caught a shoplifter at your yard sale, how would you handle it?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
He then describes Rainy Season and Lightning.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Hillary thinks we must censor or "we lose total control". Why does she demand total control?
[old diagram got deleted by accident]
so, what happens?
There are three different concepts here that are getting confused.
Is it sinful for Christians to look at beautiful women?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
It also is a device that limits the change in current flow.
What are the most significant instances of romantic jealousy in the Harry Potter series?
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
The bolt then partially travels down the line to your home.
But it can get overloaded, and no longer works.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–14 [Omar Gharbi Omar Gharbi ]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
WhatsApp is adding ads to the Status screen - TechCrunch
a photo is worth a thousand words.
A circuit breaker is similar, but is resettable.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Why do almost all vertebrates have tails, but not apes and frogs?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Gucci Owner Picks Auto Executive for One of Global Luxury’s Top Jobs - WSJ
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
I post the exact comment here.
In schematic diagrams this is the symbol for a fuse:
What are some sad truths about life?
For this case there are devices called Metal oxide varistors (MOV).
The third is lightning and “how it gets conducted into a home.”
the problem then depends on "how fast does the fuse operate?".
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Was Jimmy Carter a good President of the United States?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
It seems Mohan does not understand the difference between a comment and an Answer.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
eight
An AC voltage/ current source, and an ac inductive load.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
He then describes the function of a fuse.
Now when you have a certain ac resistance, then a current flows in a loop.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The other is “what does a “fuse” do?”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This one hit behind the barn.
There are two important concepts here.
This is where the MOV conducts again, and dissipated the energy.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Here is a simplified AC power diagram.
First Sentence:
This device then solves the entire problem.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Barnstars:
What does a fuse do?
These are simplified answers to the original question, and does not change anything I wrote above.
At least they know the answer if they wanted it.
At one ohm, the resistor has a maximum of 1 watt power.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–10–10[John johnson John Johnson ]
what exactly is a ‘surge’ protector?
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
(Dc diagram shown, AC is similar).
2024–10–16 [ OO OLAOYE OYEBODE ]
This is where this question deviates from being a 'generic' question, and becomes more specific.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
He then asserts :
So, the voltage could go up to 500 volts, and the fuse will not open up.
nine
[image of Common-mode choke]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
But… the neutral is now “floating” because of the 1 ohm resistance.
This is 'the assistant's answer'
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Upvotes:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
A fuse is a non-resetable over current circuit protector.
What is lightning?
but this device (an Inductor) … impedes the rapid changes in the current.
but I think this circuit , shows a few more pieces.